MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 7 / 218

- iii -
Large capacity Ink (2 Liters) can be set
Two one-liter ink toggles can be set for each color.
If one toggle runs out, the other toggle is selected automatically to prevent interruption of
printing caused by ink replacement.
Display of information for confirmation
It is possible to have the printing length displayed on the LCD panel and the printing condi-
tions to be plotted for confirmation during operation of the plotter.
High-speed interface
The "IEEE 1394" interface allows for high-speed data reception from the computer.
Take-Up device for printing on a long fabric
Since the take-up device winds up the plotted fabric, along fabric is also available.
Fabric retainer
If the edge of the fabric is curled or raised, the fabric retainer can be used to avoid contact of
the fabric and ink head.
Ditch for penetrated ink
Even with printing to a coarse-textured fabric, the backing fabric is not stained by penetrated
ink. Removable platen boards are prepared for fabric without ink penetration.
Dryer provided
After printing, the dryer dries the fabric on the path up to the take-up device.
Applicable to large rolls
Up to 200m rolls (cotton, t=0.25, approx 38kg) can be set, fed, and rolled up.
Printing on a stretch materials
Enable to print on a stretchy material by sticking the fabric on the belt with a pressure roller.
Cleaning the belt during printing
Enables to print as removing inks or dusts adhered on the belt.
Feed Comp. function has been newly added.
Correcting the medium feed rate during printing.
Support for 4-color plotting
4 colors are allocated to 8 heads to enable plotting.
Plotting using 4 colors takes only half the time as with the 8-color set.