MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 88 / 218

- 2.34 -
9. Adjust the head height.
a. Loosen the support screw (1), turn the height
adjustment screw (2) in the direction shown,
and move the head upward.
b. Push down the head height adjustment rod by
the right hand.
Push down the head height adjustment rod till
it stops moving anymore.
• If the tip of the head height adjustment rod
makes contact with the surface of the
fabric, repeat step 9-a to raise the head.
c. Turn the head height adjustment screw in the
direction shown and move the head
downward.
With the head height adjustment rod kept
pushed, lower the head till the tip of the rod
makes contact with the surface of the fabric.
Fabric
Tip of the head
height adjustment rod
1
2