MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 48 / 218

- 1.28 -
Initial Setting Of Inks
When using the plotter for the first time , it is necessary to set ink type.
With this device, you can set 1-liter ink cartridges (SPC-0392,0393) and 220cc ink cartridges (SPC-
0350,0356).
• When using a 220cc ink cartridge, the supplied 220cc cartridge adapter is
required.
STEP
1. Turn the power on.
After the initial operation, the device displays the type of ink set in
each ink station.
2. Press the JOG key [ ] or [ ] to select the ink
type for filling.
[Acid] Acid dye ink
[Reac] Reactive dye ink
[Disp] Disperse dye ink
[TPig] Printing pigment ink
3. Press the [ENTER] key.
4. Press the JOG key [ ] or [ ] to select the
number of colors of ink.
[8 set] 8 colors
[4 set] 4 colors
• When [TPig] is selected, only 4 set is
possible.
5. Press the [ENTER] key.
• In case of ink-filling, make sure to use the
ink cartridge which have enough ink in the
cartridge.
If ink cartridge is not set, the number for an unset cartridge is
displayed.
6. Open the station cover and pull out the tray.
In the image ink cartridges at right, the 220cc cartridge adapter is
set.
• To avoid hand injury, keep your hands
away from the space where ink tray was
inserted.
Cartridge [Reac]
− − − − − − − − A B C D E F G H
Ink Type
Type : Acid
Ink Type
Type : Reac
220cc cartridge adapter
Ink Color [Reac]
Select :8 colors
Ink Color [Reac]
Select :8 colors