MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 64 / 218

- 2.10 -
13. Press the pressure roller holding on the central
part with the fabric, and set it on the PRES-
SURE High position.
(Refer to “Adjusting the Pressure Roller Position.” P.2.24)
14. Flip the fabric which folded around the pres-
sure roller to the belt and then once put aside
the pressure roller.
15. Put the fabric on the belt with tension by ad-
justing loose position (outside of right- and
left-hand sides) to the tight position (center).
Check the tensional condition of the fabric, and put it on the belt
toward an outside, lengthening wrinkles.
16. Set the pressure roller again.
(Refer to “Adjusting the Pressure Roller Position.” P.2.22)