MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 49 / 218

- 1.29 -
Setting Ink Cartridges
The following introduces the procedure for arranging ink cartridges and ink packs.
Set the same types and same color ink cartridges into ink cartridge cases.
• Set ink cartridges and ink packs of the same type and same color to 1 and
A, 2 and B, 3 and C, 4 and D, 5 and E, 6 and F, 7 and G, and 8 and H,
respectively.
With 4 colors
• Set the ink cartridges and ink packs [1 and 2 and A and B], [3 and 4 and C
and D], [5 and 6 and E and F], or [7 and 8 and G and H] so that the inks
are the same types and same colors.
• During initial ink setting or ink change, register the appropriate ink type for
each ink station (Refer to Page 1.23).
The registered ink type is necessary when checking the printing informa-
tion and changing the heads used.
1
2
3
4
5
6
7
8
A
B
C
D
E
F
G
H
7. Set the cartridge and insert the tray to the ink
station.
(Refer to the “Setting the ink cartridge” P.1-30)
8. Close the ink station cover.
9. Push the [ENTER] key.
The print head is automatically filled with ink. The remaining
filling time is displayed in seconds.
• Do not open the station cover or pull the
cartridge from the ink station while ink-
filling.
10. Once the ink-filling procedure completes, the
device returns to the fabric width detection.
( fabric width undetected mode)
Filling
00:00:00
MEDIA SET
ROLL< >LEAF
Ink Filling
Start : ent