MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 7

Page: 7 / 324

68PH0-74E

IMPORTANT

WARNING

CAUTION/

NOTICE

NOTE

Please read this manual and follow its
instructions carefully. To emphasize spe-
cial information, the symbol and the words

WARNING

CAUTION,

NOTICE

and

NOTE

have special meanings. Pay particu-

lar attention to messages highlighted by
these signal words:

NOTE:

Indicates special information to make

maintenance easier or instructions clearer.

75F135

The circle with a slash in this manual
means “Don’t do this” or “Don’t let this hap-
pen”.

MODIFICATION WARN-
ING

WARNING

Indicates a potential hazard that

could result in death or serious

injury.

CAUTION

Indicates a potential hazard that

could result in minor or moderate

injury.

NOTICE

Indicates a potential hazard that

could result in vehicle damage.

WARNING

Do not modify your vehicle. Modifica-

tion could adversely affect safety,

handling, performance, or durability

and may violate governmental regula-

tions. In addition, damage or perfor-

mance problems resulting from

modification may not be covered

under warranty.

NOTICE

Improper installation of mobile com-

munication equipment such as cellu-

lar telephones, CB (Citizen’s Band)

radios or any other wireless transmit-

ters may cause electronic interfer-

ence with your vehicle’s ignition

system, resulting in vehicle perfor-

mance problems. Consult your MAR-

UTI SUZUKI dealer or qualified

service technician for advice.

NOTICE

Severe damage may be caused by

the use of either poor quality fuel

and/or lubricants not recommended

by MARUTI SUZUKI.

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands