MARUTI SUZUKI BALENO 2017, Owner'S Manual

Page: 85 / 324

2-67
BEFORE DRIVING
68PH0-74E
68PH02217
NOTE:
• When you change the units that average
fuel consumption is displayed in, the
instantaneous fuel consumption units will
be changed automatically.
• When you reconnect the negative (–)
terminal to the battery, the unit of the
average fuel consumption will be reini-
tialized. Change the unit again to your
preference.
Driving range
If you selected driving range the last time
you drove the vehicle, the display indicates
“ --- ” for a few seconds and then indicates
the current driving range when the ignition
switch is turned to the “ON” position.
The driving range shown in the display is
the approximate distance you can drive
until the fuel gauge indicates “E”, based on
current driving conditions.
When the low fuel warning light comes on,
the display “ --- ” will appear.
If the low fuel warning light comes on, fill
the fuel tank immediately regardless of the
value of driving range shown in the display.
As the driving range after refueling is cal-
culated based on the most recent driving
condition, the value is different each time
you refuel.
NOTE:
• If you refuel when the ignition switch is in
the “ON” position, the driving range may
not indicate the correct value.
• When you reconnect the negative (–)
terminal to the battery, the value of driv-
ing range will be shown after driving for a
while.
Clock
When the ignition switch is in the “ON” posi-
tion, the display (D) shows the time.
To change the time indication:
1) Push the trip meter selector knob (2) and
the indicator selector knob (3) together.
2) To change the hour indication, turn the
indicator selector knob (3) left or right
repeatedly when the hour indication
blinks. To change the hour indication
quickly, turn and hold the indicator selec-
tor knob (3). To set the hour indication,
push the indicator selector knob (3) and
the minute indication will flash.
3) To change the minute indication, turn the
indicator selector knob (3) left or right
repeatedly when the minute indication
blinks. To change the minute indication
quickly, turn and hold the indicator selec-
tor knob (3). To set the minute indication,
push the indicator selector knob (3).
NOTE:
When you reconnect the negative (–) termi-
nal to the battery, the clock indication will be
reinitialized. Change the indication again to
your preference.
EXAMPLE
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.