MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 237

Page: 237 / 324

5-65

OTHER CONTROLS AND EQUIPMENT

68PH0-74E

Selection of audio device (Select audio)

Follow the instructions below to select an

audio device to be paired with from the

registered audio devices.

1) Press the Bluetooth

setup button (7)

or (8).

The Bluetooth

setup menu will be dis-

played.

2) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Setup Blue-

tooth”, and press the knob (2) to deter-

mine the selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “List Audio”,

and press the knob (2) to determine the

selection.

4) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select an audio

device to be used, and press the knob

(2) to determine the selection.

5) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Select”, and

press the knob (2) to determine the

selection.

6) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Confirm”,

and press the knob (2) to complete the

pairing.

NOTE:

• When selecting “Go Back” or pressing

the back button (6), the previous menu

will be displayed.

• The phone will be disconnected when

the Bluetooth

ready audio device is

selected.

List of audio devices (List audio)

Follow the instructions below to display the

names of the registered audio devices in

sequence.

1) Press the Bluetooth

setup button (7)

or (8).

The Bluetooth

setup menu will be dis-

played.

2) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Setup Blue-

tooth”, and press the knob (2) to deter-

mine the selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “List Audio”,

and press the knob (2) to determine the

selection. The names of registered

audio devices will be displayed in

sequence.

NOTE:

When selecting “Go Back” or pressing the

back button (6), the previous menu will be

displayed.

Passkey setting (Set passkey)

Follow the instructions below to set the

security number (Passkey).

1) Press the Bluetooth

setup button (7)

or (8).

The Bluetooth

setup menu will be dis-

played.

2) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Setup Blue-

tooth”, and press the knob (2) to deter-

mine the selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Passkey”,

and press the knob (2) to determine the

selection.

4) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “New Pass-

key”, and press the knob (2) to deter-

mine the selection.

5) Press or turn the TUNE FOLDER

PUSH SOUND knob (2) to select “Con-

firm”.

6) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select a number for

the first digit, and press the knob (2) to

determine the selection. Select and

determine numbers for the second,

third and fourth digits in order in the

same manner. When not entering up to

the eighth digit, enter blanks for the

successive digits.

7) Turn the TUNE FOLDER PUSH

SOUND knob (2) to determine the

passkey setting.

NOTE:

When selecting “Go Back” or pressing the

back button (6), the previous menu will be

displayed.

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands