MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 114

Page: 114 / 324

2-96

BEFORE DRIVING

68PH0-74E

Charging Light

50G052

This light comes on when the ignition

switch is turned to the “ON” position or the

engine switch is pressed to change the

ignition mode to “ON”, and goes out when

the engine is started.

The light will come on and remain on if

there is something wrong with the battery

charging system. If the light comes on

when the engine is running, the charging

system should be inspected immediately

by your authorised Maruti Suzuki work-

shop.

Driver’s Seat Belt Reminder Light

60G049

When the driver doesn’t buckle his or her

seat belt, this light will come on and/or

blink.

For details about the seat belt reminder,

refer to “Seat Belts and Child Restraint

Systems” in this section.

“AIR BAG” Light

63J030

This light blinks or comes on for several

seconds when the ignition switch is turned

to the “ON” position or the engine switch is

pressed to change the ignition mode to

“ON” so you can check if the light is work-

ing.
The light will come on and stay on if there

is a problem in the air bag system or the

seat belt pretensioner system.

WARNING

If the “AIR BAG” light does not blink

or come on briefly when the ignition

switch is turned to the “ON” position

or the engine switch is pressed to

change the ignition mode to “ON”,

stays on for more than 10 seconds,

or comes on while driving, the air bag

system or the seat belt pretensioner

system may not work properly. Have

both systems inspected by an autho-

rized Maruti Suzuki workshop.

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands