MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 52

Page: 52 / 324

2-34

BEFORE DRIVING

68PH0-74E

When the driver does not buckle his or her

seat belt, the driver’s seat belt reminder

light in the instrument cluster will come on

or blink and a buzzer will sound as a

reminder to the driver to buckle his or her

seat belt. For more details, refer to the

explanation below.
If the driver’s seat belt remains unbuckled

when the ignition switch is turned to the

“ON” position or the engine switch is

pressed to change the ignition mode to

“ON”. The reminder works as follows:

1) The driver’s seat belt reminder light will

come on.

2) After the vehicle’s speed has reached

about 15 km/h, the driver’s seat belt

reminder light will blink and a buzzer

will sound for about 95 seconds.

3) After step 2) has finished, the reminder

light will remain on until the driver’s seat

belt is buckled.

If the driver has buckled his or her seat belt

and later unbuckles the seat belt, the

reminder system will be activated from

step 1) or step 2) according to the vehicle’s

speed. When the vehicle’s speed is below

about 15 km/h, the reminder will start from

step 1). When the vehicle’s speed is above

about 15 km/h, the reminder will start from

step 2).
The reminder will be automatically can-

celed when the driver’s seat belt is buckled

or the ignition switch is turned off, or the

engine switch is pressed to change the

ignition mode to “LOCK” (OFF).

Shoulder Anchor Height Adjuster

(If equipped)

68PH00241

Adjust the shoulder anchor height so that

the shoulder belt rides on the center of the

outboard shoulder. To move upward, slide

the anchor up. To move downward, slide

the anchor down while pulling the lock

knob out. After adjustment, make sure that

the anchor is securely locked.

WARNING

It is absolutely essential that the

driver and passengers wear their seat

belts at all times. Persons who are

not wearing seat belts have a much

greater risk of injury if an accident

occurs. Make a regular habit of buck-

ling your seat belt before putting the

key in the ignition or pressing the

engine switch.

WARNING

Be sure that the shoulder belt is posi-

tioned on the center of the outside

shoulder. The belt should be away

from your face and neck, but not fall-

ing off your shoulder. Misadjustment

of the belt could reduce the effective-

ness of the safety belt in a crash.

EXAMPLE

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands