MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 249

Page: 249 / 324

5-77

OTHER CONTROLS AND EQUIPMENT

68PH0-74E

iPod

operations

The random mode switches as follows:

RDM button

OFF

SONG RANDOM

ALBUM RANDOM

Press to play the current track repeatedly.

Press it again to cancel.

RPT button

The display switches as follows:

Press it for 1 second or longer to display the next

page.

DISP button

Playlist name /

Track title (Playlist mode only)

Artist name / Track title

Album name / Track title

Track title / Play time

While displaying iPod

menu, press to select the

desired item and display the list. When a track is

selected from the list, the playback starts.

ENT button

During playback

• Press to display iPod

menu.

• Press it for 1 second or longer to display the top menu.

While iPod

menu is displayed

• Press to display the folder in one layer upper.

• Press it for 1 second or longer to display the top menu.

MENU button

While displaying iPod

menu, press to dis-

play the next/previous list in the same layer.

TUNE FOLDER UP/DOWN button

Press to skip to the next/previous file.

Press it for 1 second or longer to fast-forward/fast-

rewind the file.

SEEK TRACK UP/DOWN button

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands