MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 245

Page: 245 / 324

5-73

OTHER CONTROLS AND EQUIPMENT

68PH0-74E

Radio operations

NOTE:

When there are fewer than 6 stations that can be stored even if 1 round of auto store operation is performed, no station will be

stored at the remaining preset buttons.

Press to return to the last received fre-

quency in the previous auto store mode.

Press it for 2 seconds or longer. It selects

the stations with the stronger signals and

stores them in order.

AS button

Press to select the radio station.

SEEK TRACK UP/DOWN button

Press to select the desired preset station.

PRESET buttons (1-6)

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands