MARUTI SUZUKI BALENO 2017, Owner'S Manual

Page: 238 / 324

5-66
OTHER CONTROLS AND EQUIPMENT
68PH0-74E
Deletion of audio device information
(Delete audio)
Follow the instructions below to delete the
registered information of audio device.
1) Press the Bluetooth
®
setup button (7)
or (8).
The Bluetooth
®
setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select an audio
device to be deleted, and press the
knob (2) to determine the selection.
5) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Delete”, and
press the knob (2) to determine the
selection.
6) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Delete?”,
and press the knob (2) to determine the
selection.
7) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Confirm”,
and press the knob (2) to complete the
deletion.
NOTE:
When selecting “Go Back” or pressing the
back button (6), the previous menu will be
displayed.
Disclaimer for Bluetooth
®
function
• Depending on the mobile phone models,
some phones may not be compatible
fully or partially (some function may be
restricted).
• Connectivity or voice quality may get
affected depending on circumstances.
• After the ignition switch is turned to the
“ON” position, the audio system takes
few seconds to detect and connect to
the Bluetooth
®
device (if already paired).
Remote Audio Controls
(If equipped)
Controlling of basic functions of the audio
system is available using the switches on
the steering wheel.
68PH00572
(1)
(2)
(3)
(4)
EXAMPLE