MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 277

Page: 277 / 324

7-21

INSPECTION AND MAINTENANCE

68PH0-74E

68PH00718

(1) Tread wear indicator

(2) Indicator location mark

2) Check that the depth of the tread

groove is more than 1.6 mm (0.06 in.).

To help you check this, the tires have

molded-in tread wear indicators in the

grooves. When the indicators appear

on the tread surface, the remaining

depth of the tread is 1.6 mm (0.06 in.)

or less and the tire should be replaced.

3) Check for abnormal wear, cracks and

damage. Any tires with cracks or other

damage should be replaced. If any tires

show abnormal wear, have them

inspected by your authorised Maruti

Suzuki workshop.

4) Check for loose wheel bolts.

5) Check that there are no nails, stones or

other objects sticking into the tires.

WARNING

• Air pressures should be checked

when the tires are cold or you may

get inaccurate readings.

• Check the inflation pressure from

time to time while inflating the tire

gradually, until the specified pres-

sure is obtained.

• Never underinflate or overinflate

the tires.

Underinflation can cause unusual

handling characteristics or can

cause the rim to slip on the tire

bead, resulting in an accident or

damage to the tire or rim.

Overinflation can cause the tire to

burst, resulting in personal injury.

Overinflation can also cause

unusual handling characteristics

which may result in an accident.

(2)

(1)

EXAMPLE

CAUTION

Hitting curbs and running over rocks

can damage tires and affect wheel

alignment. Be sure to have tires and

wheel alignment checked periodi-

cally by your authorised Maruti

Suzuki workshop.

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands