MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 64

Page: 64 / 324

2-46

BEFORE DRIVING

68PH0-74E

“AIR BAG” light

63J030

If the “AIR BAG” light on the instrument

cluster does not blink or come on when the

ignition switch is first turned to the “ON”

position, or the ignition mode is first

changed to “ON”, or the “AIR BAG” light

stays on, or comes on while driving, the air

bag system (Or the seat belt pretensioner

system) may not work properly. Have the

air bag system inspected by an authorised

Maruti Suzuki workshop as soon as possi-

ble.

Air bag symbol meaning

72M00150

You may find this label on the sun visor.

Front Air Bags

68PH00247

Front air bags are designed to inflate in

severe frontal collisions when the ignition

switch is in the “ON” position or the ignition

mode is “ON”.

Front air bags are not designed to inflate in

rear impacts, side impacts, rollovers or

minor frontal collisions, since they would

offer no protection in those types of acci-

dents. Remember, since an air bag

deploys only one time during an accident,

seat belts are needed to restrain occu-

pants from further movements during the

accident.

WARNING

An air bag supplements, or adds to,

the crash protection offered by seat

belts. The driver and all passengers

must be properly restrained by wear-

ing seat belts at all times, whether or

not an air bag is mounted at their

seating position, to minimize the risk

of severe injury or death in the event

of a crash.

EXAMPLE

WARNING

NEVER use a rearward facing child

restraint on a seat protected by an

ACTIVE AIRBAG in front of it, DEATH

or SERIOUS INJURY to the CHILD

can occur.

EXAMPLE

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands