MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 159

Page: 159 / 324

3-29

OPERATING YOUR VEHICLE

68PH0-74E

If the rear view from the rearview cam-

era is not shown or there is a poor

image

• If the rear view from the rearview camera

is not shown.

– Check to make sure that the ignition

mode is “ON”.

– Check to make sure that the gearshift

lever is shifted to the “R” position.

• If the image from the rearview camera is

poor.

– Check to make sure that the camera

lens is not dirty.

– Check to make sure that light from the

sun or the beam of the headlights from

the vehicle behind is not shining

directly into the lens.

If the rearview camera system is still not

working properly after checking the above,

have the system inspected by an autho-

rised Maruti Suzuki workshop as soon as

possible.

Braking

60G165S

The distance needed to bring any vehicle

to a halt increases with the speed of the

vehicle. The braking distance needed, for

example, at 60 km/h will be approximately

4 times greater than the braking distance

needed at 30 km/h. Start to brake the vehi-

cle when there is plenty of distance

between your vehicle and the stopping

point, and slow down gradually.

Power-Assisted Brakes

Your vehicle has power-assisted brakes. If

power assistance is lost due to a stalled

engine or other failures, the system is still

fully operational on reserve power and you

can bring the vehicle to a complete stop by

pressing the brake pedal once and holding

it down. The reserve power is partly used

up when you depress the brake pedal and

reduces each time the pedal is pressed.

Apply smooth and even pressure to the

pedal. Do not pump the pedal.

EXAMPLE

WARNING

If water gets into the brake devices,

brake performance may become poor

and unpredictable. After driving

through water or washing the under-

side of the vehicle, test the brakes

while driving at a slow speed to see if

they have maintained their normal

effectiveness. If the brakes are less

effective than normal, dry them by

repeatedly applying the brakes while

driving slowly until the brakes have

regained their normal effectiveness.

WARNING

Even without reserve power in the

brake system, you can still stop the

vehicle by pressing the brake pedal

harder than normally required. How-

ever, the stopping distance may be

longer.

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands