MARUTI SUZUKI BALENO 2017 Owner'S Manual Download Page 117

Page: 117 / 324

2-99

BEFORE DRIVING

68PH0-74E

Low engine coolant temperature light

(Blue color)

This light stays on while the engine is still

cold and goes off when the engine has

warmed up.

If this light blinks, there is a problem with

the system. Have your vehicle inspected

by your authorised Maruti Suzuki work-

shop.

High engine coolant temperature warn-

ing light (Red color)

If this light blinks while driving, it means the

engine is running hot. Avoid driving condi-

tions that may lead to actual overheating. If

the light stays on without blinking, then the

engine is overheating. Follow the instruc-

tions in the “Engine trouble: Overheating”

of “EMERGENCY SERVICE” section.

Turn Signal Indicators

50G055

When you turn on the left or right turn sig-

nals, the corresponding green arrow on the

instrument panel will flash along with the

respective turn signal lights. When you

turn on the hazard warning switch, both

arrows will flash along with all of the turn

signal lights.

Main Beam (High beam) Indicator

Light

50G056

This indicator comes on when headlight

main beams (high beams) are turned on.

Illumination Indicator Light

64J045

This indicator light comes on while the

position lights, tail light and/or the head-

lights are on.

Front Fog Light Indicator Light

(If equipped)

68PH00273

The front fog light indicator light comes on

when the front fog light operates.

NOTICE

Continuing to drive the vehicle when

engine overheating is indicated can

result in severe engine damage.

Summary of Contents for BALENO 2017





































































































































































































































































































































Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands

MARUTI SUZUKI BALENO 2017, Owner'S Manual

Search results

Summary of Contents for BALENO 2017

Reviews:

Related manuals for BALENO 2017

Brands by name

Popular brands