Flying with the System
Version 6.03, May 2017
Page 170 of 192
On next valid start, task will advance to first point automatically and message “Task started”
will be displayed.
7.2.2
Restarting Task
If for some reason you decide to abandon the task and you would like to restart the task go
to task mode and press any button. In top row the
RESTART
button is shown. Press it.
You have to confirm restarting of the task. Once the task is restarted navigation will be
changed back to start point.
7.2.3
Over Turn Point
When a turn point observation zone is reached the message
“Inside zone”
will be displayed
and the task will auto advance to the next turn point if the
Auto next
option was selected
(see Chapter
Error! Reference source not found.
).
When the
Auto next
option was not selected the message
NEXT
will be displayed. Press
the associated button to advance to the next turn point. If for some reason you missed this
message you can always advance the task to the next turn point by pressing the
NEXT
button. Go to task mode. In the upper row the
NEXT
button is shown. Press this button
and navigation will be advanced to next turn point.
In case you did not reach turn point and you wish to continue navigation towards the next
point anyway press the
NEXT
button.
