Operating Modes
Version 6.03, May 2017
Page 59 of 192
point your flight forms a triangle according to FAI rules. The Optimisation dialogue is used
to define the look and feel.
Check the
Show optimization
item to enable display of the optimised track.
Optimization colour
and
width
defines the colour and width for these lines.
If
Show optimized triangle
is checked also lines for the largest optimised triangle are
shown. Please note this might not be a triangle according to FAI rules.
The FAI Area group defines how the FAI area is drawn. Select the
Colour
item to change
the colour of the FAI area. Use the ZOOM selector knob to change transparency of the
area. 100% means completely transparent and only the outline will be drawn. 0% means
completely solid (not recommended).
Check the
Show km lines
item to see lines which indicate what will be the size of the
completed triangle.
These lines will always be plotted in kilometres scale regardless of the Units value.
5.1.6.7
Task
Use this dialogue to define how a task is drawn in task mode.
Task colour
defines the colour of task lines.
Obs.zone colour
defines colours for
observation zones. Use the ZOOM selector knob to change transparency of area. 100%
