Operating Modes
Version 6.03, May 2017
Page 60 of 192
means completely transparent and only the outline will be drawn. 0% means completely
solid (not recommended). When
Show flown task
is checked also the flown task will be
drawn. This might be useful when flying assigned area tasks.
The
Show selected zone only
item controls whether all task observation zones are to be
displayed or, if there is only one, then that alone will be shown.
When
Show optimal track
is enabled, small blue arrow is drawn next to aircraft. This
arrow indicates most optimal direction to fly.
AAT isolines
are showing expected speed, delta time or expected distance, which means if
you turn to a next point at any of the lines, you will have the results indicated next to the
line based on the calculation to the next turn point zone.
AAT fill
is filling the zone. Zone becomes transparent if you are “too early, too short or task
delta time is not 0”, if the zone is solid colour, you are already “too late, flew too long in the
zone or your task delta time is not achievable”.
5.1.6.8
Flarm
The system can be equipped with the internal or external FLARM module. If your device is
equipped with FLARM this menu will let you to modify presentation of the Flarm radar
display.
Flarm radar is not available if competition or privacy modes are active. Refer to
Chapter 5.1.11.6.
