Basics
Version 6.03, May 2017
Page 13 of 192
2.1.7
External Options
By using a RS485 bus system a wide range of optional interfaces can be easily connected to
the basic configuration with minimal installation work. The LXNAV bus system can be
extended easily by use of RS485 splitting units, which allow plug and play connection of
optional devices.
The following units can be connected to the main system:
Second Seat Device (LX9000D, LX9050D LX9070D LX8000D or LX8080D):
The unit installed in the rear seat of the glider is powered and receives all necessary
data from the main unit. The communication between both units is exclusively via the
RS485 bus system.
Remote Control:
An extremely ergonomic leather-coated handle which includes 8
push buttons to operate the main display unit and also two additional buttons with open
wires. These two buttons can be used for instance as PTT for radio and SC/Vario
changeover command. A second remote control can be installed to control second seat
device or for side by side operation.
Electrical Compass Device
Secondary Vario Indicators (I8,I9 or I80 indicator)
Flap sensor
MOP box
for jet engines
232 Bridge
for radio or transponder
Wi-fi module
External Flarm module
2.1.8
Simulator
There are two options to stay in condition and familiar with your system. LXSim is free of
charge program, which you can download from
or data from the Condor PC