System Description
Version 6.03, May 2017
Page 23 of 192
4.3.1
Text Edit Control
The Text Editor is used to input an alphanumeric string of arbitrary length; the picture below
shows typical options when editing text. Use the bottom-right knob to change the value at
the current cursor position.
Press the
CHAR>>
button to advance the cursor to the next position. The cursor can also
be moved to next position using the bottom-left knob. Rotate it clockwise to move forward.
The Abc
button is a toggle button and will change the letter case. Press it to toggle modes.
Abc
mode will start every new word with a capital letter; subsequent letters will be
lower case.
ABC
mode will enter only upper case letters.
abc
mode will enter only lower case letters.
Pressing the
DELETE
button will delete the character at current cursor position. Continually
press the
DELETE
button to delete all characters after the current cursor position.
Press
OK
to confirm changes and leave control. Press
CANCEL
to abandon changes and
revert back to the values before entering this screen.
4.3.2
Masked Text Edit Control
The masked editor is a similar control to the text editor but only limited characters can be
entered at any particular position. It is designed to enter latitude, longitude and passwords.
