LXNAV LX80xx User Manual Download

Page: 44 / 192

Operating Modes

Version 6.03, May 2017

Page 44 of 192

5.1.5.10

Update databases

Under this section you can upload databases such as:



.asapt extension (airspace and airport database file provided by LXNAV)



.fln (flarmnet file)



.obs (flarm obstacle file)

LXNAV distributes free of charge airport and airspace database throughout the whole world.

The airport and airspace database is regularly maintained by LXNAV. The latest version of

the database can be found on our webpage

www.lxnav.com

The database is distributed as single file with

.asapt

extension. Copy this file to an SD Card

or USB stick. Plug the SD card or USB stick into the main display unit and select the

Update database

menu point. If multiple ASAPT files are found on a SD card a dialogue

window to select the appropriate one will pop up.

Plug the SD card or USB stick into the main display unit and select the

Update database

menu item. If multiple files are found on a SD card a dialogue to select the appropriate one

will be shown.

Databases are updated automatically and progress of the update will be shown on the

screen.

5.1.5.11

PDF documents

Main display unit can store almost unlimited number of PDF documents. User can store here

flight manual, maintenance manual, scans of all gliding documents and also checklists.

Summary of Contents for LX80xx

































































































































































































Search results

Summary of Contents for LX80xx

Reviews:

Related manuals for LX80xx

Brands by name

Popular brands

LXNAV LX80xx, User Manual

Search results

Summary of Contents for LX80xx

Reviews:

Related manuals for LX80xx

Brands by name

Popular brands