LSIS XBE-DC08A, User Manual

Page: 994 / 1284

Chapter 1 Built-in FEnet communication
1-115
Buil
t-
in
Comm
Buil
t-
in
(5)
Writing parameters
After parameter setting for the E-mail service is completed, you can apply the parameters to the PLC as
show below.
Procedures Description
1
Write
parameters and
Link Enable
Select [Online] → [Write] in XG5000’s project window. After checking [Set together with
Link Enable] in the [Write] window, check ‘Link Enable’ in P2P 02(embedded).
2 If you click the [OK] button, ‘Write Parameters’ and ‘Link Enable’ will be done.
Notice
(1) If you set up the parameters for the SMTP relay server to use common E-mails
(Gmail, yahoo, etc.), you need to set up for SMTP relay server.
-
Refer to (2) Setting to use the relay server of 1.11.2 E-mail Setting