LSIS XBE-DC08A, User Manual

Page: 1131 / 1284

Chap.3 Web Server
3-8
Buil
t-
in
Comm
3.3.1 TCP/IP Settings
To use the web server function, set the parameters of the embedded FEnet module as below procedures. For more
details on FEnet parameters, refer to ‘1.6.2 Setting the basic parameters’ of Chap.5 Embedded Communication Functions
of XGB basic unit.
Procedures Details
1
Module selection
Double-click ‘New PLC [[B0S1 Internal FEnet]’in the project window.
2
1
2
3
1) IP address
setting
1) Enter the IP address, subnet mask, gateway, DNS server address.
2) This address can be commonly used for P2P service, high speed link service,
remote service, FTP service, web server, etc.
2) Host table
setting
IP for emergency access
[Note 1]
3) Activating web
server function
1. Check ‘Activates the function of Web Server’.
2. Enter the user ID and password
[Note 2]
.
4) OK
If you click ‘OK’, the parameter settings for web server is completed.