Chapter 1 Built-in FEnet communication
1-73
Buil
t-
in
Comm
Buil
t-
in
Select the cycle to be communicated in communication cycle setting as shown in the left side of
d)
[Fig. 1.8.5].
Choose the cycle and click ‘OK’ button. Then, if you double-click the No.1 module of high speed
e)
link, the window for setting block will be displayed as shown in the right side of [Fig. 1.8.5].
(2)
Setting the high speed link transmission block
[Fig. 1.8.6]Setting high speed link transmission block
Set the station type as MASTER
a)
Choose the transmission mode
b)
If you choose transmission, it will be automatically set as the exchange number set in the basic
c)
parameters.
Input the block number(range: 0~31).
d)
nput the area to be read.The area to be read is the each area of XGB’s CPU modules.
e)
If you input the word size of the area to be read, setting transmission blocks is completed.
f)
Summary of Contents for XBE-DC08A
