LSIS XBE-DC08A, User Manual, Page: 988 / 1284

Chapter 1 Built-in FEnet communication
1-109
Buil
t-
in
Comm
Buil
t-
in
(2)
Registration of group address
If you want to send the mail not to individual but to the group, you can set up the group address as
shown below.
Procedures Description
1
Create group
<Address book>
1) Double-click the address of P2P No.2.
2
Register group
Selection of a blank
Click
New group name
Selecting member
After selecting to a blank of [Address book], select [Address book]- [group],
the edition window for E-mail address book’s group will be created. The details of
the group edition window are as shown below.
1) Group name: Name of the group to create newly
2) Contact information: Currently registered addresses
3) Members: Addresses to be included to the group
4) Select: It adds the addresses selected from the Contact Information to the
Members.
5) Delete: It deletes the addresses selected in the Members from the Group.
After selecting the addresses to add to the group in the Contact Information,
if you click [Select], you can see the addresses are added to the Members.