LSIS XBE-DC08A, User Manual

Page: 361 / 1284

Po
sit
io
n
in
g
Chapter 1 Overview
1-2
e) Various Homing Control Function.
1) 7 methods are available for Homing.
a) Origin detection after DOG Off
b) Origin detection after deceleration in case of DOG On
c) Origin detection by the HOME and upper/lower limit
d) Origin detection by DOG
e) High speed Origin detection
f) Origin detection by upper/lower limit
g) Origin detection by HOME
2) It is Available to set the origin of machine without homing by setting the floating origin
(f) For the Acceleration/Deceleration method, it is available to select trapezoid or S curve.
(3) High speed start process .
The start time of positioning is less than 5
㎳
(1
㎳
when continuous operation is not used).
In addition, there is no delay time between axes in synchronous start and interpolation start.
(4) Easy maintenance.
Various data such as operation data, operation parameter are saved on FLASH Memory in PLC. Therefore, data will
be saved permanently. Max w
riting count of the flash memory is 100,000.
(5) Self-diagnosis, monitoring and test are available with XG-PM software package.
(a) Monitoring (Module & External Input/output Signal) Function
(b) Trace Function
(c) Trend Function
(d) Reading and Saving Module Parameter/Operation Data
(e) Creation of Cam Data
(f) Providing details about errors and the solution for it
(g) Print Function of various forms
(h) Editing operation data in Excel program is available