LSIS XBE-DC08A, User Manual

Page: 992 / 1284

Chapter 1 Built-in FEnet communication
1-113
Buil
t-
in
Comm
Buil
t-
in
(4)
P2P block setting
For the actual E-mail service, you can create the mail address book and message written above in the
P2P block as shown below.
Procedures Description
1
P2P block
After selecting [Embedded FEnet] in XG5000’s project window, double-click [P2P block]
of [P2P 02(embedded)] or double-click [P2P block] of P2P No.2 in [P2P View].
2
Make P2P block
1) In the P2P parameter setting window, tick the [E-mail] checkbox.
2) Select [ESEND] in P2P functions.
3) Set up the start-up conditions to transfer E-mail.
3
Setting
Click the setting button to set up each variable.
For more details, refer to ‘E-mail variables’
4 If you click the [OK] button, the parameter settings to transfer E-mail will be done.