LSIS XBE-DC08A, User Manual

Page: 146 / 1284

M
ain
Chapter 2 CPU Function
2-20
2.9 How to allocate I/O No.
Allocation of I/O No. is to allocate the address to each module’s I/O terminals to read the data from the input modules and
output the data in the output modules when executing operation. In the XGB PLC, all modules occupy 64 points.
(1) Allocation of I/O No.
The basic unit occupies 2 slots of No.1 so 124 points are allocated and all remaining expansion module occupies
64 points. (including special, communication modules)
Example of allocating I/O No. based on the system configuration
Slot No. Model I/O allocation Remakrs
0 XEC-DN32U
input : %IX0.0.0 ~ %IX0.0.63
output : %QX0.0.0 ~ %QX0.0.63 Actua linput : %IX0.0.0 ~ %IX0.0.15
Actual output : %QX0.0.0 ~ %QX0.0.15
1
Embedded special
functions input : %IX0.1.0 ~ %IX0.1.63
output : %QX0.1.0 ~ %QX0.1.63
-
2 XBE-DC32A
input : %IX0.2.0 ~ %IX0.2.63
output : %QX0.2.0 ~ %QX0.2.63
Actual input : %IX0.2.0 ~ %IX0.2.31
3 XBE-TN32A
input : %IX0.3.0 ~ %IX0.3.63
output : %QX0.3.0 ~ %QX0.3.63
Actual output : %QX0.3.0 ~ %QX0.3.31
4 XBL-C21A
input : %IX0.4.0 ~ %IX0.4.63
output : %QX0.4.0 ~ %QX0.4.63
-
5 XBF-AD04A
input : %IX0.5.0 ~ %IX0.5.63
output : %QX0.5.0 ~ %QX0.5.63
-
6 XBF-DV04A
input : %IX0.6.0 ~ %IX0.6.63
output : %QX0.6.0 ~ %QX0.6.63
-
7 XBE-DC16A
input : %IX0.7.0 ~ %IX0.7.63
output : %QX0.7.0 ~ %QX0.7.63
Actual input : %IX0.7.0 ~ %IX0.7.15
8 XBE-RY16A
input : %IX0.8.0 ~ %IX0.8.63
output : %QX0.8.0 ~ %QX0.8.63
Actual output : %QX0.8.0 ~ %QX0.8.15
* The number of empty I/O points can be used as the internal relay.
* In the case of the high performance XGB basic type, it does not have the embedded special function corresponding to No.1
slot but occupies No.1 slot as an empty slot.
(2) When the I/O of the I/O parameter is allocated, the allocation information is displayed.