LSIS XBE-DC08A, User Manual

Page: 1020 / 1284

Chapter 2 Built-in Cnet communication
2-22
B
u
ilt
-in
C
omm
4) Setting Item
When setting Cnet communication parameter, the user should define as follows.
[Built-in communication standard setting screen ]
Item Setting content
Station no.
•
set from station 0 to station 255.
Speed
•
1200, 2400, 4800, 9600, 19200, 38400, 57600,76800, 115200 bps available
Data bit
•
7 or 8 bit available
Parity bit
•
None, Even, Odd available
Stop bit
•
1 or 2 bit available
Modem
initialization
•
When using dialup modem, the function is available. In case of modem communication, input the
initialization instruction of applied modem.
Type
•
It is fixed as follows according to Cnet type
1) Built-
in communication → channel 1 : RS-232C , channel 2 : RS-485
2) XBL-
C41A → channel 1 : not used, channel 2: RS-422/RS-485
3) XBL-
C21A → channel 1 : not used, channel 2: RS-232C
Response
waiting time
•
It means the time from sending frame to receving.
1) operation setting : it is available when active mode is set to “Use P2P”.
2) waiting time : 100ms+(setting value
×
100ms)
Delay time
Setting
•
It means that frame is sent at user-defined frame send timing with delay as setting delay time.
1) operation setting : it is available when communication type is RS-422/485.
Delay time
between
characters
•
It means interval between characters in one frame.
1) operation setting : it is always available regardless of active mode.
2) In case of that wating time is set to 0, it is applied 3.5 character time
1)
as communication speed..
[ communication parameter setting item ]