LSIS XBE-DC08A, User Manual

Page: 267 / 1284

B
a
s
ic
Chapter 5 Data Log Function
5-54
3) Release Value Setting
Among Event Save functions, release value setting can be done only in WORD Condition. It affects data save interval
and frequency. Once the release value is set, the condition after event occurrence saves data until the release value
is satisfied.
Use Release Value Setting Do Not Use Release Value Setting
%MW0 > 100
☞
Release Value Setting 50
Saves data until the setting value after
event occurrence is 50
Saves data until the condition is met after
event occurrence
%MW0>= 100
%MW0== 100 Release Value Cannot be Set
%MW0< 100
☞
Release Value: 120
Saves data until the setting value after
event occurrence is 120
%MW0<= 100
%MW0<> 100 Release Value Cannot be Set
Note
Release value can be set as follows. If the following is not complied with, an error window will appear and data input
will not work. Check it when setting the parameter.
☞
Release value many not overlap with the range of set values.
Condition Range of Release Value
Large Set Value >= Release Value
Large or Same Set Value > Release Value
small Set Value <= Release Value
Small or Same Set Value <= Release Value
Same
Setting Available
Not Same