LSIS XBE-DC08A, User Manual

Page: 873 / 1284

Spe
ci
al
Chapter 1 Embedded Analog
1-51
9) Output status setting
(1) When the PLC system is stopped, set the analog output status.
(2) When the output status setting is not specified, output the previous value.
Setting
value
- - - - - - - -
Address
No. 14~17
- - - - - -
Set the output status ( 2 bits)
00 : Previous value output
01 : Min value output
10 : Mid value output
11 : Max value output
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Address Details Setting
14 Voltage channel 0 output status setting
Input data type setting (bit)

00: Previous value

01: Min value

10: Mid value

11: Max value
15 Voltage channel 1 output status setting
16 Current channel 0 output status setting
17 Current channel 1 output status setting
10) Interpolation method setting
Shows the setting of the interpolation method of each channel.
Voltage
Output
Channel 0
Address
No. 18
Interpolation method setting (2 bits per channel)
00 : Disable
01 : Linear interpolation
10 : S curve interpolation
Voltage
Output
Channel 1
Current
Output
Channel 0
Current
Output
Channel 1
- - - - - - - -
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
11) Interpolation period setting
Shows the setting of interpolation time of each channel.
Voltage
Output
Channel 0
Address
No. 19
Interpolation time setting (2 bits per channel)
00 : 10[ms]
01 : 100[ms]
10 : 1[s]
11 : 60[s]
Voltage
Output
Channel 1
Current
Output
Channel 0
Current
Output
Channel 1
- - - - - - - -
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0