LS ELECTRIC LSLV-H100 Series, User Manual

Page: 178 / 618

165
Learning Advanced Features
Code Description
Setting Function
0 None Not used
1 V1 -10-10 V input voltage terminal
3 V2 I2 analog input terminal
[When the analog voltage/current input terminal
selection switch (SW4) at the terminal block is set
to I (current), input 0-20 mA current. If it is set to V
(voltage), input 0
–10 V]
4 I2
6 Pulse TI Pulse input terminal (0-32 kHz Pulse input)
7 Int. 485 RS-485 input terminal
8 FieldBus Communication command via a communication
option card
10 EPID1
Output External PID 1 output
11 EPID1
Fdb Val External PID 1 feedback
PID-22 PID FDB
AuxMod
The PID-30 (PID FDB AuxMod) provides formulas to calculate the final
feedback value. If PID-31 (PID RefAuxSrc) is set to any other value
than ‘None,’ the final feedback is calculated using the input values at the
sources (set at PID-31 and PID-32).
Setting
0 M+(G*A)
1 M*(G*A)
2 M/(G*A)
3 M+(M*(G*A))
4 M+G*2*(A-50)
5 M*(G*2*(A-50))
6 M/(G*2*(A-50))
7 M+M*G*2*(A-50)
8 (M-A)^2
9 M^2+A^2
10 MAX(M,A)
11 MIN(M,A)
12 (M+A)/2
13 Square Root(M+A)
M= Value by the source set at PID-30
G= Gain value set at PID-33
A= Value by the source set at PID-31
PID-23 PID Fdb
Aux G
Gain value used a formula set at PID-22.
PID-24
PID Fdb Band Sets the maximum and minimum value by adding or subtracting the
PID Fdb Band value (set at PID-24) from the reference value. When the