LS ELECTRIC LSLV-H100 Series, User Manual

Page: 405 / 618

Table of Functions
392
No. Name Description
BI12 P3 Input 1
–True / 0–False
BI13 P4 Input 1
–True / 0–False
BI14 P5 Input 1
–True / 0–False
BI15 P6 Input 1
–True / 0–False
BI16 P7 Input 1
–True / 0–False
BI17 Relay1 State 1
–On / 0 - Off
BI18 Relay2 State 1
–On / 0 - Off
BI19 Relay3 State 1
–On / 0 - Off
BI20 Relay4 State 1
–On / 0 - Off
BI21 Relay5 State 1
–On / 0 - Off
BI22 Q1 (OC1) State 1
–On / 0 - Off
7.5.3.5 Error Code
Defined Codes Description
00
The device has been reset. Currently waiting for the ‘Identity Yourself’
command.
01 Undefined command
02 Checksum error has occurred.
03
Data size exceeded the input buffer (message is bigger than the device
buffer size).
05 Data field error (input message size does not fit the command type)
10 Invalid data (message value is out of the range)
11
Invalid command for data type (command does not fit the message
frame)
12
Command is not accepted (device has ignored a command due to a
fault. The master device sends a ‘Status Update Request’).
8 Table of Functions
This chapter lists all the function settings for the H100 series inverter. Use the references
listed in this document to set the parameters. If an entered set value is out of range, the