LS ELECTRIC LSLV-H100 Series, User Manual

Page: 191 / 618

178
Learning Advanced Features
5.9 External PID
External PID refers to the PID features other than the basic PID features required to control the
inverter. The following table shows the areas where external PID controls can be applied.
Depending on the PID output mode, the EPID output value can be overlapped to the PID output.
External output is also available through the analog output settings at OUT-01 and OUT-07.
Group Code Name LCD Display Parameter Setting Setting Range Unit
EPI
00 Jump Code Jump Code 40 1
–99
01
EPID 1 Mode
Selection EPID1
Mode
0 None 0
–3
02
EPID1output
monitor value EPID1
Output
0.00
-100.00
–
100.00%
Unit
03
EPID1 reference
monitor value EPID1 Ref
Val
- - -
04
EPID1 feedback
monitor value EPID1 Fdb
Val
- - -
05
EPID1error
monitor value EPID1 Err
Val
- - -
06
EPID1 command
source selection EPID1 Ref
Src
0 Keypad 0
–10
-
07
EPID1 keypad
command value EPID1 Ref
Set
Unit Min
Unit Min
–Unit
Max
%
08
EPID1 feedback
source selection EPID1 Fdb
Src
0 V1 0
–9
-
Purpose Function
Speed Control
Controls speed by monitoring the current speed levels of the equipment
or machinery being controlled. Control maintains consistent speed or
operates at the target speed.
Pressure Control
Controls pressure by monitoring the current pressure levels of the
equipment or machinery being controlled. Control maintains consistent
pressure or operates at the target pressure.
Flow Control
Controls flow by monitoring the amount of flow in the equipment or
machinery to be controlled. Control maintains consistent flow or
operates at a target flow.
Temperature
Control
Controls temperature by monitoring the current temperature levels of
the equipment or machinery to be controlled. Control maintains a
consistent temperature or operates at a target temperature.