LS ELECTRIC LSLV-H100 Series, User Manual

Page: 64 / 618

51
Installing
the Inverter
Remarque
Si la commande avant (Fx) est activée, le moteur doit tourner dans le sens anti-horaire si
on le regarde côté charge du moteur. Si le moteur tourne dans le sens inverse, inverser
les câbles aux bornes U et V.
Verifying the Motor Rotation
1 On the keypad, set DRV-
07 to ‘1 (Keypad)’.
2 Set a frequency reference.
3 If the inverter is in OFF mode, press the [AUTO] key twice on the keypad to operate
the inverter in the forward (Fx) direction.
4 If the inver ter is operating in AUTO mode, press the [AUTO] key once on the keypad
to operate the inverter in the forward (Fx) direction.
5
Observe the motor’s rotation from the load side and ensure that the motor rotates
counterclockwise (forward).
•
Check the parameter settings before running the inverter. Parameter settings may have to
be adjusted depending on the load.
•
To avoid damaging the inverter, do not supply the inverter with an input voltage that
exceeds the rated voltage for the equipment.
•
Before running the motor at maximum speed, confirm the motor’s rated capacity. As
inverters can be used to easily increase motor speed, use caution to ensure that motor
speeds do not accidently exceed the motor’s rated capacity.