LS ELECTRIC LSLV-H100 Series, User Manual

Page: 225 / 618

212
Learning Advanced Features
Motor
Capacity
(kW)
Rated
Current
(A) No-load
Current
(A) Rated Slip
Frequency
(Hz) Stator
Resistance
(

)
Leakage
Inductance
(mH)
400 V
110 203.5 48.8 1.00 0.0326 0.585
132 242.3 58.1 1.00 0.0272 0.488
160 290.5 69.7 1.00 0.0224 0.403
185 335.0 77.0 1.00 0.0210 0.380
220 405.0 93.1 1.00 0.1630 2.930
250 467.8 104.9 1.00 0.1455 2.615
315 604.0 132.8 1.00 0.1140 2.040
355 687.8 146.4 1.00 0.1020 1.820
400 782.0 161.2 1.00 0.0906 1.616
500 985.3 206.2 1.00 0.0700 1.330
Auto Tuning Parameter Setting Details
Code Description
DRV-14 Motor Capacity
Sets the motor capacity to be used. The maximum motor capacity
is limited by the inverter capacity and the keypad only displays the
inverter capacity.
BAS-20 Auto Tuning
Select an auto tuning type and run it. Select one of the options and
then press the [ENT] key to run the auto tuning.
Setting Function
0 None Auto tuning function is disabled. Also, if you
select one of the auto tuning options and run
it, the parameter value will revert back to ‘0’
when the auto tuning is complete.
1 All
(rotating
type) Measures all motor parameters while the
motor is rotating, including stator resistance
(Rs), no-load current (Noload Curr), rotor
time constant (Tr), etc. Since the motor is
rotating while the parameters are being
measured, if the load is connected to the
motor spindle, the parameters may not be
measured accurately. For accurate
measurements, remove the load attached to
the motor spindle.
Note that the rotor time constant (Tr) must be
measured in a stopped position.