LS ELECTRIC LSLV-H100 Series, User Manual

Page: 189 / 618

176
Learning Advanced Features
Group Code Name LCD Displays Parameter Setting Setting Range Unit
13
PID wakeup 2
delay time PID
WakeUp2 DT
20.0 0
–6000.0
sec
14
PID wakeup 2
value PID
WakeUp2Dev
20.00 0
–Unit Band
Unit
20 Soft Fill options Soft Fill Sel 0 No 0
–1
-
PID Operation Sleep Mode Setting Details
Code Description
AP1-05 Sleep Bst Set
Sets the sleep boost volume. Feedback must reach the boost
level (PID ReSleep Bst Set) for the inverter to enter the
Sleep Mode.
AP1-06 Sleep Bst Freq Sets the inverter operation frequency to reach sleep boost level.
AP1-07 PID Sleep1 DT
AP1-11 PID Sleep2 DT
AP1-08 PID Sleep1Freq
AP1-12 PID Sleep2Freq
If the operating frequency stays below the frequencies set at
AP1-08 and AP1-12 for the set times at AP1-07 and AP1-11, the
inverter accelerates to the PID sleep boost frequency (PID Sleep
Bst Freq). Then, when the feedback reaches the value set at the
boost level, the inverter enters standby mode.
AP1-09 PID WakeUp1 DT
AP1-13 PID WakeUp2 DT
AP1-10 PID WakeUp1Dev
AP1-14 PID WakeUp2Dev Sets the reference for PID operation in PID sleep mode. PID
operation resumes when PID feedback variation (from the PID
reference) exceeds the values set at AP1-10 and AP1-14, and
maintains the condition for times set at AP1-09 or AP1-13.
IN-65
–71
P1
–7 Define
When the PID Sleep Wake 2 terminal is set and input, PID
operation sleep mode is operated based on the parameter
settings at AP1-11
–14.