Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 300 / 788

Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Value
Subtype
Length
Length Description Attribute Name
Attribute
Number
string:
address-pool-name sublen len
■
Name of an assigned address pool
that should be used to assign an
address for the user
■
Same as RADIUS attribute 88,
Framed-Pool
Local-Address-Pool [26-2]
string: local-interface sublen len Interface to apply to the E Series side of
the connection
The interface value can be one of the
following:
■
The IP address (with subnet mask)
■
The loopback interface
Local-Interface [26-3]
integer: 4-byte
primary-dns-address 6 12
■
B-RAS user’s DNS address negotiated
during IPCP
■
4-octet IP address
Primary-DNS [26-4]
integer: 4-byte
secondary-dns-address 6 12
■
B-RAS user’s DNS address negotiated
during IPCP
■
4-octet IP address
Secondary-DNS [26-5]
integer: 4-byte
primary-wins-address 6 12
■
B-RAS user’s WINS (NBNS) address
negotiated during IPCP
■
4-octet IP address
Primary-WINS (NBNS) [26-6]
integer: 4-byte
secondary-wins-
address 6 12
■
B-RAS user’s WINS (NBNS) address
negotiated during IPCP
■
4-octet IP address
Secondary-WINS
(NBNS) [26-7]
string:
tunnel-virtual-router sublen len Virtual router name for tunnel connection Tunnel-Virtual-Router [26-8]
string:
tunnel-password sublen len Tunnel password in cleartext Tunnel-Password [26-9]
string:
input-policy-name sublen len Input policy name to apply to B-RAS user’s
interface Ingress-Policy-Name [26-10]
string:
output-policy-name sublen len Output policy name to apply to B-RAS
user’s interface Egress-Policy-Name [26-11]
integer: 0 = disable,
1 = enable 6 12 Enable or disable input statistics on B-RAS
user’s interface Ingress-Statistics [26-12]
integer: 0 = disable,
1 = enable 6 12 Enable or disable output statistics on B-RAS
user’s interface Egress-Statistics [26-13]
260 ■
Juniper Networks VSAs
JUNOSe 11.0.x Broadband Access Configuration Guide