Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 743 / 788

host1# show ip http server
Admin status: enabled
Access class: not defined
Listening port: 80
Same host limit: 3
Protocol: IPv6
Meaning
Table 153 on page 703 lists the show ip http server command output fields.
Table 153: show ip http server Output Fields
Field Description Field Name
Status of the HTTP local server in the software:
enabled or disabled.
Enabled implies that the HTTP local server can listen
for IPv4 , IPv6, or both IPv4 and IPv6 exception
packets.
Admin status
Name of a standard IP access list that determines
which hosts can log on to the HTTP local server Access class
Port that the HTTP local server uses to track requests
for connection Listening port
Maximum number of connections allowed between
one IP address and the HTTP local server Same host limit
Protocols that the HTTP local server is listening for:
IPv4, IPv6, or IPv4 and IPv6. Protocol
Related Topics
■
show ip http server
Monitoring Statistics for Connections to the HTTP Local Server
Purpose
Display statistics about the connections to the HTTP local server.
Action
To display statistics about HTTP local server with the baseline values subtracted:
host1# show ip http statistics delta
Server enable count: 1
Server disable count: 0
Same host enforced: 0
Access class denies: 0
No resource failures: 0
Http connections created: 2
Http connections terminated: 2
Http connections aged out: 1
Urls successfully served: 0
Monitoring Statistics for Connections to the HTTP Local Server
■ 703
Chapter 28: Monitoring Service Manager