Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 489 / 788

To display detailed information about a particular target, specify the target IP address
and mask:
host1:dialout# show l2tp dial-out target 10.1.1.0/24
Target 10.1.1.0/24
Operational status: up
Active sessions: 10
Total triggers: 127
Failed sessions: 2
Connected sessions: 8
To display aggregate counts for targets in each of the possible operational and
administrative states:
host1:dialout# show l2tp dial-out target summary
To display detailed configuration, state, and statistics:
host1:dialout# show l2tp dial-out target detail
To display information about the operational or administrative state:
host1:dialout# show l2tp dial-out target state inService
To displays dial-out information across all virtual routers:
host1:dialout# show l2tp dial-out target allVirtualRouters
NOTE: The level of a user’s permission determines the use of the allVirtualRouters
option. For example, if you have permission to view only the current virtual router,
then that is all that is displayed when you enter a command.
Meaning
Table 96 on page 449 lists the show l2tp dial-out target command output fields.
Table 96: show l2tp dial-out target Output Fields
Field Description Field Name
Address of the target Target
Status of the connection to the target Status
Currently active session to the target Active Sessions
Trigger packets received for the target Total triggers
Sessions that are currently in the failed state Failed sessions
Sessions that are currently in the connected state Connected sessions
Monitoring Dial-out Targets within the Current VR Context
■ 449
Chapter 16: Monitoring L2TP and L2TP Dial-Out