manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Get familiar with Juniper JUNOSE 11.0.X MULTICAST ROUTING with our Configuration Manual. This comprehensive manual covers all aspects of multicast routing configuration. Download it for free from manualshive.com and enhance your networking skills with the latest information on multicast routing protocols and configurations.

Share
Download
background image

RX speed AVP............................................................359

S

S-VLAN links

between CPE and PE routers

pool section for Prefix Delegation................107

SCR (RADIUS attribute 26-16)....................................217
SDX (Service Deployment System) software..............133

See also 

SRC software

server-name command......................................357, 359
service commands

service dhcp-external .........................................522
service dhcp-local.......................................477, 621
service dhcp-local authenticate...........................481
service dhcpv6-local ...........................................483
service-description................................................68

service definitions......................................635, 636, 639

copying...............................................................642
creating...............................................................639
installing.............................................................642
modifying...........................................................642
modifying QoS configurations.............................647
specifying parameter instances...........................645
specifying QoS profiles.......................................645
uninstalling.........................................................642

service instance.........................................................637
service interim accounting

in a dual stack

of IPv4 and IPv6 services.............................670

IPv4 and IPv6 services

overview......................................................670

Service Manager

CLI support.........................................................654
CoA-Request messages.......................................688
combined IP4 and IPv6 service

example......................................................696

configuring

Service Manager license...............................653

deactivating........................................................658

setting thresholds........................................658

guided entrance..................................636, 687, 688
IPv4 and IPv6 services

combined, activating...................................664
combined, deactivating...............................664
combined, overview....................................663
in a dual stack, activating............................664
in a dual stack, overview.............................663
independent, activating...............................664
independent, deactivating...........................664
independent, overview................................663
overview..............................................663, 664

license sessions...................................................653
macros................................................................636
multiple services.................................................661
mutex service.............................................636, 661

overview.............................................................635
parameter values................................................658
preprovisioning services.............................671, 674
QoS

considerations.............................................652
modifying configurations of ........................647
referencing configurations of.......................645
removing references of................................647

RADIUS dynamic-request server.........................688
RADIUS support..................................................654
RADIUS tags.......................................................658
service definition................................635, 636, 639

parameters..................................................672

service instance..................................................637
service session....................................................637

forcing deactivation.....................................677
profiles........................................................674

service session profiles.......................................637
session thresholds...............................................679
statistics..............................................658, 674, 680

macro command.........................................680
using RADIUS..............................................681
using the CLI................................................682

statistics collection

for external parent groups, setting up..........683

subscriber session ID..........................................679
subscriber sessions.............................................671
supported platforms............................................637
tasks...................................................................637
testing services...................................................671

Service Manager commands

no service-management owner-session

force................................................................677

no service-management subscriber-session

force........................................................677, 679

service-management install................................642
service-management owner-session...................671
service-management service-session-profile.......674
service-management subscriber-session

service-session................................................671

statistics..............................................................674
time....................................................................674
volume................................................................674

Service Manager license

configuring..........................................................653

service session...........................................................637
Service-Category (RADIUS attribute 26-14).................216
Service-Description (RADIUS attribute 26-53).............221

setting...................................................................68

Service-Interim-Acct-Interval (RADIUS attribute

26-140)...........................................................657, 667

Service-Session (RADIUS attribute 26-83)...........657, 666
Service-Statistics (RADIUS attribute 26-69).................657
Service-Stats (RADIUS attribute 26-69).......................681
Service-Timeout (RADIUS attribute 26-68).........657, 660
Service-Volume (RADIUS attribute 26-67)..........657, 660

744

■

Index

JUNOSe 11.0.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.0.X MULTICAST ROUTING

Native Instruments Razor Manual preview
Razor
Brand: Native Instruments Pages: 74
Novell ZENworks 7.2 Linux Management Manual preview
ZENworks 7.2 Linux Management
Brand: Novell Pages: 10
ShoreTel ShoreWare User Manual preview
ShoreWare
Brand: ShoreTel Pages: 25
OCZ ATV-TURBO - WINDOWS 98 Installation Manual preview
ATV-TURBO - WINDOWS 98
Brand: OCZ Pages: 5
Sony D-NE329SP - Atrac Cd Walkman Portable Player Specifications preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Specifications preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 2
Sony D-NE326CK - Atrac Cd Walkman Portable Player Specifications preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE329SP - Atrac Cd Walkman Portable Player Service Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 32
Sony D-NE1 - Portable Cd Player Service Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 34
Sony D-NE326CK - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 35
Sony D-NE1 - Portable Cd Player Operating Instructions Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 116
FieldServer FS-8704-13 Driver Manual preview
FS-8704-13
Brand: FieldServer Pages: 19
Genius W POINTER How To Use preview
W POINTER
Brand: Genius Pages: 3
Genius G-Pen M712X Brochure & Specs preview
G-Pen M712X
Brand: Genius Pages: 2
Genius VIDEOCAM SLIM USB2 Manual preview
VIDEOCAM SLIM USB2
Brand: Genius Pages: 4
Genius F610 User Manual preview
F610
Brand: Genius Pages: 11
KAPERSKY ANTI-VIRUS 4.5 - FOR MICROSOFT EXCHANGE... User Manual preview
ANTI-VIRUS 4.5 - FOR MICROSOFT EXCHANGE...
Brand: KAPERSKY Pages: 134
Datalogic PDA User Manual preview
PDA
Brand: Datalogic Pages: 100

Brands by name

Popular brands

Load more brands