Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 473 / 788

Table 86: show l2tp destination profile Output Fields
Field Description Field Name
Destination profile attributes of L2TP destination Destination profile attributes
Method used to transfer traffic Transport
Method used to transfer traffic Virtual Router
IP address of the LAC Peer address
Maximum number of sessions allowed for the
destination profile Destination profile maximum
sessions
Number of current sessions for the destination profile Destination profile current session
count
Host profile attributes of L2TP destination Host profile attributes
Name of the remote host Remote host
Name of the local host Local hostname
IP address of the local host Local IP address
Identifier for bundled sessions Bundled group id
Password for the tunnel Tunnel password
Name of the host profile Interface profile
Status of proxy LCP for the remote host Proxy lcp
Default upper binding type mlppp upper binding type
Status of the disconnect cause generation Disconnect-cause avp generation
Number of packets that the peer can transmit without
receiving an acknowledgment from the router Receive window size
Maximum number of sessions allowed for the host
profile Maximum sessions
L2TP peer resynchronization method for the host
profile Failover resync
State of result code override, enabled or disabled Override
out-of-resource-result-code
Number of current sessions for the host profile Current session count
Monitoring Configured Destination Profiles or Host Profiles
■ 433
Chapter 16: Monitoring L2TP and L2TP Dial-Out