Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 93 / 788

■
Use the no version to set the corresponding address to 0 (or ::).
■
See aaa ipv6-dns
aaa ipv6-dns secondary
■
Use to specify the IPv6 address of the DNS secondary name server.
■
Example
host1(config)# aaa ipv6-dns secondary 2001:db8::8002
■
Use the no version to set the corresponding address to 0 (or ::).
■
See aaa ipv6-dns
WINS Primary and Secondary NMS Configuration
To configure the WINS primary and secondary name server addresses:
1.
Specify the IP address of the WINS primary name server.
host1(config)# aaa wins primary 192.168.10.05
2.
Specify the IP address of the WINS secondary name server.
host1(config)# aaa wins secondary 192.168.10.40
NOTE: The router uses name server addresses exclusively for PPP clients and not
for domain name server resolution.
aaa wins primary
■
Use to specify the IP address of the WINS primary name server.
■
Example
host1(config)# aaa wins primary 192.168.10.05
■
Use the no version to set the corresponding address to 0.0.0.0.
■
See aaa wins
aaa wins secondary
■
Use to specify the IP address of the WINS secondary name server.
■
Example
host1(config)# aaa wins secondary 192.168.10.40
■
Use the no version to set the corresponding address to 0.0.0.0.
■
See aaa wins
Configuring Name Server Addresses
■ 53
Chapter 1: Configuring Remote Access