manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Get familiar with Juniper JUNOSE 11.0.X MULTICAST ROUTING with our Configuration Manual. This comprehensive manual covers all aspects of multicast routing configuration. Download it for free from manualshive.com and enhance your networking skills with the latest information on multicast routing protocols and configurations.

Share
Download
background image

applying through RADIUS...................................393
AVP relay, configuring................................388, 390
configuration guidelines......................................388
configuring..........................................................390
how to apply.......................................................388
monitoring..........................................................438

Tunnel-Assignment-Id (RADIUS attribute 82).............207
Tunnel-Client-Auth-Id (RADIUS attribute 90)..............209
Tunnel-Client-Endpoint (RADIUS attribute 66)............205
Tunnel-Interface-Id (RADIUS attribute 26-44).............218
Tunnel-Medium-Type (RADIUS attribute 65)..............205
Tunnel-Preference (RADIUS attribute 83)...................208
tunnel-server command.............................................370
tunnel-server ports

shared.................................................................334

Tunnel-Server-Auth-Id (RADIUS attribute 91)..............210
Tunnel-Server-Endpoint (RADIUS attribute 67)...........205
tunnel-service modules

installing multiple for LNS sessions.....................376

tunnel-subscriber authentication command.................50
Tunnel-Type (RADIUS attribute 64)............................204
tunneled PPP session accounting statistics.................402
tunnels, IP

shared tunnel-server ports..................................334

tx-connect-speed-method command..........................402
type command, L2TP.........................................353, 357

U

UDP (User Datagram Protocol)

checksums..............................................23, 33, 147

udp-port command......................................35, 243, 250
Upstream-Calculated-QoS-Rate (RADIUS attribute

26-142)...................................................................226

user domain, mapping to L2TP tunnel.......................353
User-Name (RADIUS attribute 1)..................................10
user-name command.................................................588
user-prefix command.................................................588
usernames and passwords from a domain

configuring............................................................16

using shared tunnel-server ports................................370

V

valid lifetime

for delegated prefixes

configuring..................................................105
default.........................................................105

setting

without expiration.......................................105

validation state, inheriting for MAC addresses ...........607
vendor class identifier option.....................................497
vendor-specific (suboption 9).....................................501
vendor-specific attributes. 

See 

 VSAs

virtual routers

mapping user domain names.........8, 115, 125, 422
redirected authentication........................................9

Virtual-Router (RADIUS attribute 26-1).......................214
vlan commands

vlan id.................................................................621

VLAN links

between CPE and PE routers

pool section for Prefix Delegation................107

VLANs (virtual local area networks)

configuring dynamic subscriber interfaces..........617

VPNs (virtual private networks)

connecting subscribers ......................................602

VSAs (vendor-specific attributes)

DSL Forum

controlling inclusion of................................231
descriptions.................................................270
in AAA access and accounting

messages.................................................182

for dynamic IP interfaces......................................82
formats...............................................................259

W

walled garden. 

See 

 guided entrance

Web access to E Series router....................................455
Windows Internet Name Service. 

See 

 WINS

WINS, assigning IP addresses...............................51, 118

748

■

Index

JUNOSe 11.0.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.0.X MULTICAST ROUTING

Yamaha M7CL StageMix V1.5 User Manual preview
M7CL StageMix V1.5
Brand: Yamaha Pages: 20
Yamaha LS9-16 Owner'S Manual preview
LS9-16
Brand: Yamaha Pages: 80
MACROMEDIA COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX... Use Manual preview
COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX...
Brand: MACROMEDIA Pages: 90
Eaton Network Shutdown Module V3 User Manual preview
Network Shutdown Module V3
Brand: Eaton Pages: 65
MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual preview
COLDFUSION 5-ADVANCED ADMINISTRATION
Brand: MACROMEDIA Pages: 372
Sun Microsystems 2005Q2 Quick Start Manual preview
2005Q2
Brand: Sun Microsystems Pages: 38
Ulead VideoStudio 9 User Manual preview
VideoStudio 9
Brand: Ulead Pages: 218
Red Hat CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE Manual preview
CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE
Brand: Red Hat Pages: 76
IRIS READIRIS 12 PRO Getting Started Manual preview
READIRIS 12 PRO
Brand: IRIS Pages: 6
Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION Administration Manual preview
CERTIFICATE SYSTEM 7.3 - ADMINISTRATION
Brand: Red Hat Pages: 554
Extron electronics AVT 100 User Manual preview
AVT 100
Brand: Extron electronics Pages: 37
Symantec pcAnywhere Administrator'S Manual preview
pcAnywhere
Brand: Symantec Pages: 105
Symantec Norton Personal Firewall 2003 User Manual preview
Norton Personal Firewall 2003
Brand: Symantec Pages: 151
Symantec SERVICEDESK 7.0 MR2 Implementation Manual preview
SERVICEDESK 7.0 MR2
Brand: Symantec Pages: 188
Adaptec DuraStor 6220SS Installation And User Manual preview
DuraStor 6220SS
Brand: Adaptec Pages: 133
Adaptec 133U2 User Manual preview
133U2
Brand: Adaptec Pages: 174
TomTom TomTom App Reference Manual preview
TomTom App
Brand: TomTom Pages: 58
GRASS VALLEY MEDIAEDGE-SVS4 Datasheet preview
MEDIAEDGE-SVS4
Brand: GRASS VALLEY Pages: 2

Brands by name

Popular brands

Load more brands