Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 481 / 788

Table 92: show l2tp tunnel Output Fields (continued)
Field Description Field Name
Status of the enabled tunnel:
■
idle
■
connecting
■
established
■
disconnecting
State
Names the router used to identify the tunnel locally
and remotely Local and peer tunnel id
Sub-interface information for the enabled tunnel:
■
total—Number of sessions that the router has
created on this tunnel
■
active—Number of operational sessions on the
tunnel
■
failed—Number of requests that did not reach
an operational state
Sub-interfaces:
Information about the traffic sent and received Statistics
Tunnel control channel information Control channel statistics
Number of packets that the peer can transmit without
receiving an acknowledgment from the router. Receive window size
Number of acknowledgments that the router has
received from the peer. Receive ZLB
Number of received control packets that were out of
order. Receive out-of-sequence
Number of packets that arrived at the router outside
the receiving window. Receive out-of-window
Number of packets that the router can transmit before
receiving an acknowledgment from the peer. Transmit window size
Number of acknowledgments that the router has sent
to the peer. Transmit ZLB
Number of packets that the router is waiting to send
to the peer, plus the number of packets for which the
peer has not yet acknowledged receipt. Transmit queue depth
Information received from the peer when the tunnel
was created Tunnel operation configuration
Monitoring Detailed Configuration Information about Specified Tunnels
■ 441
Chapter 16: Monitoring L2TP and L2TP Dial-Out