Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 43 / 788

Chapter 1
Configuring Remote Access
This chapter describes how to configure remote access to an Juniper Networks E
Series Broadband Services Router. This chapter discusses the following topics:
■
Remote Access Overview on page 4
■
Remote Access Platform Considerations on page 5
■
Remote Access References on page 6
■
Before You Configure B-RAS on page 6
■
Remote Access Configuration Tasks on page 6
■
Configuring a B-RAS License on page 7
■
Mapping a User Domain Name to a Virtual Router on page 8
■
Setting Up Domain Name and Realm Name Usage on page 12
■
Specifying a Single Name for Users from a Domain on page 16
■
Configuring RADIUS Authentication and Accounting Servers on page 18
■
Configuring Local Authentication Servers on page 40
■
Configuring Tunnel Subscriber Authentication on page 50
■
Configuring Name Server Addresses on page 51
■
Configuring Local Address Servers on page 54
■
Configuring DHCP Features on page 60
■
Creating an IP Interface on page 61
■
Configuring AAA Profiles on page 63
■
Using RADIUS Route-Download Server to Distribute Routes on page 71
■
Using the AAA Logical Line Identifier to Track Subscribers on page 76
■
Using VSAs for Dynamic IP Interfaces on page 82
■
Mapping Application Terminate Reasons to RADIUS Terminate Codes on page 84
■
Configuring Timeout on page 88
■
Limiting Active Subscribers on page 89
■
Notifying RADIUS of AAA Failure on page 90
■
Configuring Standard RADIUS IPv6 Attributes for IPv6 Neighbor Discovery Router
Advertisements and DHCPv6 Prefix Delegation on page 90
■
Propagation of LAG Subscriber Information to AAA and RADIUS on page 92
■ 3