manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Get familiar with Juniper JUNOSE 11.0.X MULTICAST ROUTING with our Configuration Manual. This comprehensive manual covers all aspects of multicast routing configuration. Download it for free from manualshive.com and enhance your networking skills with the latest information on multicast routing protocols and configurations.

Share
Download
background image

Related Topics

■

show dhcp count

Monitoring DHCP Binding Host Information

Purpose

Display information for specified DHCP client bindings, with results arranged in
ascending order by IP address. The 

show dhcp host

 command displays information

only for DHCP client bindings with assigned IP addresses.

Action

To display information about all DHCP local server bindings:

host1:vr1#

show dhcp host local

BindingId      HwAddress      Type    IpSubnet   IpAddress   State
----------   --------------   -----   --------   ---------   -----
2409734593   8000.0001.9365   local   0.0.0.0    81.3.0.2    bound
2409734595   8000.0003.9365   local   0.0.0.0    81.3.0.3    bound
2409734597   8000.0005.9365   local   0.0.0.0    81.3.0.4    bound
2409734599   8000.0007.9365   local   0.0.0.0    81.3.0.5    bound
2409734619   8000.0009.9365   local   0.0.0.0    81.3.0.6    bound
2409734618   8000.000b.9365   local   0.0.0.0    81.3.0.7    bound
2409734605   8000.000d.9365   local   0.0.0.0    81.3.0.8    bound
2409734607   8000.000f.9365   local   0.0.0.0    81.3.0.9    bound
2409734609   8000.0011.9365   local   0.0.0.0    81.3.0.10   bound
2409734611   8000.0013.9365   local   0.0.0.0    81.3.0.11   bound

The output of the 

show dhcp host

 command is identical to the output of the 

show

dhcp binding

 command except for the order of the client bindings. The results of

the 

show dhcp host

 command are arranged in ascending order by IP address,

whereas the results of the 

show dhcp binding

 command are arranged in ascending

order by binding ID.

To display binding information for DHCP clients with a specified interface string:

host1:vr2#

show dhcp host interface ip71.*4

BindingId      HwAddress        Type     IpSubnet   IpAddress   State
----------   --------------   --------   --------   ---------   -----
3053453315   7000.0002.9365   external   0.0.0.0    71.1.0.4    bound
3053453325   7000.000c.9365   external   0.0.0.0    71.1.0.14   bound
3053453353   7000.0016.9365   external   0.0.0.0    71.1.0.24   bound

This 

show dhcp host

 command uses the * (asterisk) regular expression metacharacter

in the interface string to display information for DHCP client bindings on virtual
router vr2 with an IP address beginning with 71 and ending with 4. The results of
the 

show dhcp host

 command are arranged in ascending order by IP address.

To display binding information for DHCP clients that match the specified circuit ID
string:

host1:vr3#

show dhcp host circuit-id \\xe3

BindingId      HwAddress       Type     IpSubnet   IpAddress   State
----------   --------------   -------   --------   ---------   -----
3070230529   7000.0000.9365   relay-p   0.0.0.0    71.1.0.2    bound
3070230531   7000.0002.9365   relay-p   0.0.0.0    71.1.0.4    bound
3070230572   7000.0004.9365   relay-p   0.0.0.0    71.1.0.6    bound
3070230535   7000.0006.9365   relay-p   0.0.0.0    71.1.0.8    bound

542

■

Monitoring DHCP Binding Host Information

JUNOSe 11.0.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.0.X MULTICAST ROUTING

Adobe ACROBAT 3D Manual preview
ACROBAT 3D
Brand: Adobe Pages: 822
Altigen MaxACD Administrator Manual preview
MaxACD Administrator
Brand: Altigen Pages: 261
Blamsoft VK-1 Viking User Manual preview
VK-1 Viking
Brand: Blamsoft Pages: 28
Sling Media Slingbox User Manual preview
Slingbox
Brand: Sling Media Pages: 112
Motorola Mobility Services Platform 3.3.1 Software Installation Manual preview
Mobility Services Platform 3.3.1
Brand: Motorola Pages: 28
Motorola IDEN COMPANIONPRO User Manual preview
IDEN COMPANIONPRO
Brand: Motorola Pages: 94
Motorola AIR-CB21AG-A-K9 Quick Start Manual preview
AIR-CB21AG-A-K9
Brand: Motorola Pages: 15
Motorola MOTONAV User Manual preview
MOTONAV
Brand: Motorola Pages: 43
Motorola IDEN ORGANIZER User Manual preview
IDEN ORGANIZER
Brand: Motorola Pages: 33
Motorola FREESCALE SEMICONDUCTOR M68EZ328ADS User Manual preview
FREESCALE SEMICONDUCTOR M68EZ328ADS
Brand: Motorola Pages: 65
Motorola Mobility Services Platform 3.2 Software Installation Manual preview
Mobility Services Platform 3.2
Brand: Motorola Pages: 68
Motorola IDEN WIRELESS DATA SERVICES User Manual preview
IDEN WIRELESS DATA SERVICES
Brand: Motorola Pages: 116
Motorola Mobility Services Platform 3.2.1 Installation Manual preview
Mobility Services Platform 3.2.1
Brand: Motorola Pages: 72
Motorola mobile PhoneTools Quick Start Manual preview
mobile PhoneTools
Brand: Motorola Pages: 12
Yamaha DM2000 V2.1 Supplementary Manual preview
DM2000 V2.1
Brand: Yamaha Pages: 4
Yamaha ASIO DirectKS Owner'S Manual preview
ASIO DirectKS
Brand: Yamaha Pages: 6
Yamaha Audio Owner'S Manual preview
Audio
Brand: Yamaha Pages: 7
Yamaha Arp Owner'S Manual preview
Arp
Brand: Yamaha Pages: 9

Brands by name

Popular brands

Load more brands