Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 337 / 788

Chapter 8
Monitoring RADIUS
This chapter describes how to monitor the RADIUS attributes, RADIUS
dynamic-request server, and RADIUS relay.
RADIUS topics are described in the following sections:
■
Monitoring Override Settings of RADIUS IETF Attributes on page 297
■
Monitoring the NAS-Port-Format RADIUS Attribute on page 298
■
Monitoring the Calling-Station-Id RADIUS Attribute on page 299
■
Monitoring the NAS-Identifier RADIUS Attribute on page 299
■
Monitoring the Format of the Remote-Circuit-ID for RADIUS on page 300
■
Monitoring the Delimiter Character in the Remote-Circuit-ID for
RADIUS on page 300
■
Monitoring the Acct-Session-Id RADIUS Attribute on page 300
■
Monitoring the DSL-Port-Type RADIUS Attribute on page 301
■
Monitoring the Connect-Info RADIUS Attribute on page 301
■
Monitoring the NAS-Port-ID RADIUS Attribute on page 301
■
Monitoring Included RADIUS Attributes on page 302
■
Monitoring Ignored RADIUS Attributes on page 304
■
Setting the Baseline for RADIUS Dynamic-Request Server Statistics on page 304
■
Monitoring RADIUS Dynamic-Request Server Statistics on page 305
■
Monitoring the Configuration of the RADIUS Dynamic-Request Server on page 306
■
Setting a Baseline for RADIUS Relay Statistics on page 307
■
Monitoring RADIUS Relay Server Statistics on page 307
■
Monitoring the Configuration of the RADIUS Relay Server on page 309
■
Monitoring the Status of RADIUS Relay UDP Checksums on page 310
■
Monitoring the Status of ICR Partition Accounting on page 310
Monitoring Override Settings of RADIUS IETF Attributes
Purpose
Display the current override setting for RADIUS IETF attributes. You can monitor the
NAS-IP-Address [4], NAS-Port-Id [87], Calling-Station-Id [31], and NAS-Identifier [32]
attributes.
Monitoring Override Settings of RADIUS IETF Attributes
■ 297